ΕΛ EN
Home | Faculties & Departments | Faculty of Geotechnical Sciences and Environmental Management | Department of Chemical Engineering
790
Publications
42%
Collaborative Ratio
Department

Department of Chemical Engineering

Faculty of Geotechnical Sciences and Environmental Management

Cyprus University of Technology

24
Members
23
Researchers
35%
OA Ratio
Organization name
Department of Chemical Engineering
Parent orgunit
Faculty of Geotechnical Sciences and Environmental Management
Organization type
Department

H-Index Reports

Index type Scopus Google Scholar Web of Science
H-index 50 64 9
H5-index 31 30 7
H10-index 44 49 8

General metrics

Unique Publications

Βελτιστοποίηση λειτουργίας των θερμικών μονάδων ηλεκτροπαραγωγής στην Κύπρο, ενόψει της πράσινης μετάβασης

Stephanou, Pavlos S., Παφίτης, Χριστόδουλος
Publishing year: 2026
Thesis Repository
Η παγκόσμια μετάβαση προς βιώσιμα ενεργειακά συστήματα αποτελεί μια ιδιαίτερα κρίσιμη πρόκληση, ιδίως για περιοχές όπως η Κύπρος, οι οποίες εξακολουθούν να παρουσιάζουν σημαντική εξάρτηση από συμβατικά καύσιμα. Η παρούσα μελέτη εξετάζει τη μείωση του οικονομικού κόστους και των περιβαλλοντικών επιπτώσεων μέσω της βέλτιστης διαχείρισης των μονάδων ηλεκτροπαραγωγής και της αξιοποίησης φυσικού αερίου (ΦΑ) και υδρογόνου (H2) στην παραγωγή ηλεκτρικής ενέργειας, λαμβάνοντας παράλληλα υπόψη την ενσωμάτωση ανανεώσιμων πηγών ενέργειας (ΑΠΕ). Με βάση πραγματικά δεδομένα παραγωγής για την περίοδο 2014-2023, η ανάλυση εστιάζει σε δύο διακριτές χρονικές περιόδους: 2014-2019 και 2020-2023, με τη δεύτερη να χαρακτηρίζεται από αυξημένο κόστος καυσίμων και εκπομπές αερίων του θερμοκηπίου (ΑτΘ). Αναπτύχθηκαν τρία σενάρια διαθεσιμότητας μονάδων παραγωγής ηλεκτρικής ενέργειας (100%, 65% και 58%) με και χωρίς χρήση ΦΑ, ενώ οι οικονομικές εξοικονομήσεις αξιολογήθηκαν μέσω προσομοιώσεων που εφαρμόζουν αποδοτικές στρατηγικές δέσμευσης μονάδων (Unit Commitment-UC). Τα αποτελέσματα δείχνουν ότι οι στρατηγικές UC μπορούν να επιτύχουν ετήσιες μειώσεις κόστους από 3% έως 11,2%, ενώ η αξιοποίηση ΦΑ σε ανταγωνιστική τιμή €450/τόνο αυξάνει περαιτέρω τις εξοικονομήσεις σε 11,6%-40,8%. Αντιθέτως, υψηλότερες τιμές (€640/τόνο) οδηγούν σε σημαντική αύξηση του κόστους, υπογραμμίζοντας την ανάγκη για ρυθμιστικό έλεγχο τιμών. Υιοθετώντας προκαθορισμένη αναλογία μάζας υδρογόνου προς ΦΑ 20:80, η εισαγωγή υδρογόνου...

The Giesekus model revisited

Publishing year: 2026
Journal article
2026, Volume 348
Web of Science

Recovery of bioactive compounds and manufacture of bacterial cellulose nanocrystals from citrus processing wastewater: An integrated biorefinery approach

Syranidou E., Constantinides G., Patsalou M., Kelesidis G.A., Moularas C., Karanicola P., Panagiotou G., Seridou P., Koutinas M.
Publishing year: 2026
Journal article
International Journal of Biological Macromolecules, 2026, Volume 337
Scopus
Although citrus processing wastewater is rich in bioactive compounds and nutrients, the significant potential of the specific feedstock for valorization still remains largely unexploited. Thus, a citrus processing wastewater-based biorefinery was employed to recover carotenoids and polyphenols, while producing microbially derived bacterial cellulose nanocrystals. The solid fraction of the effluent was applied in solid-liquid extraction using various green- and petrochemical-based solvents, yielding 1.97 ± 0.03 mg of carotenoids per g of dry solid via a mixture of D-limonene/ethanol/acetic acid. A continuous adsorption/desorption system was developed, adsorbing 89.1 ± 0.63% (w/v) of the initial phenolic content. Different solvents were assessed as elution agents maximizing the desorption of the phenolic content (76 ± 7.25%, w/v) using 75% ethanol. The remaining sugar-rich liquid was subsequently utilized for bacterial cellulose manufacture employing Komagataeibacter sucrofermentans DSM 15973. Elevated fermentative production was achieved at pH-value 6.0 using a surface-to-volume ratio of 1.53 cm−1, yielding 4.98 ± 0.28 g L−1 of the biopolymer following 6 d of incubation. The bacterial cellulose formed was processed using sulfuric acid, aiming to hydrolyze the amorphous fraction and produce a biomaterial of higher crystallinity as well as enhanced stability and mechanical properties as compared to the pristine biopolymer. The nanocrystals produced exhibited colloidal stability...

Experimental and computational investigation of carbon-free hydrogen carriers for green H2 generation in batch systems

Adamou, Panayiota, Constantinou, Achilleas
Publishing year: 2026
Thesis Repository
The scientific and research community has put great effort to find alternative solutions regarding the global shift from conventional carbon-based fuels to sustainable energy sources to mitigate climate change. A promising solution is the utilisation of hydrogen (H2) as fuel, which is green and carbon-neutral, however, its production, storage and transportation challenges, hinders its widespread adoption as an energy carrier. Thus carbon-free hydrogen carriers can be used, offering better control and the potential of generating H2 on-site. Hence, the scope of the present work is the experimental and theoretical investigation, using computational fluid dynamics (CFD) of hydrous hydrazine (HH) and ammonia borane (AB) as carbon-free hydrogen carriers for green H2 production in batch reactor systems. Initially, the catalytic decomposition of HH was examined using a commercial catalyst in a lab-scale batch system, evaluating the effect of stirring rate, temperature, catalyst mass, HH concentration and NaOH concentration. The optimum conditions led to a H2 yield above 90%. A 0-D model was developed, integrating a power law reaction model, which validated well the experimental data and following, 2-D simulations of the reactor system were conducted providing velocity, temperature, HH and catalytic particles profiles distribution within the reactor. A subsequent study on HH catalytic decomposition was carried out using a lab-synthesised catalyst, evaluating the same experimental par...

Very low Ru loadings boosting performance of Ni-based dual-function materials during the integrated CO2 capture and methanation process

Constantinou A., Bansode A., Stoian D., Charisiou N.D., Goula M.A., Sebastian V., Naikwadi D.R., Tsiotsias A.I., Harkou E., van der Linden B., Manos G.
Publishing year: 2025
Journal article
Journal of Energy Chemistry, 2025, Volume 102
Scopus
Pages 309-328
Herein, the effect of the Ru:Ni bimetallic composition in dual-function materials (DFMs) for the integrated CO2 capture and methanation process (ICCU-Methanation) is systematically evaluated and combined with a thorough material characterization, as well as a mechanistic (in-situ diffuse reflectance infrared fourier-transform spectroscopy (in-situ DRIFTS)) and computational (computational fluid dynamics (CFD) modelling) investigation, in order to improve the performance of Ni-based DFMs. The bimetallic DFMs are comprised of a main Ni active metallic phase (20 wt%) and are modified with low Ru loadings in the 0.1–1 wt% range (to keep the material cost low), supported on Na2O/Al2O3. It is shown that the addition of even a very low Ru loading (0.1–0.2 wt%) can drastically improve the material reducibility, exposing a significantly higher amount of surface-active metallic sites, with Ru being highly dispersed over the support and the Ni phase, while also forming some small Ru particles. This manifests in a significant enhancement in the CH4 yield and the CH4 production kinetics during ICCU-Methanation (which mainly proceeds via formate intermediates), with 0.2 wt% Ru addition leading to the best results. This bimetallic DFM also shows high stability and a relatively good performance under an oxidizing CO2 capture atmosphere. The formation rate of CH4 during hydrogenation is then further validated via CFD modelling and the developed model is subsequently applied in the prediction...

VALORISATION OF AQUATIC BIOMASS AND SIDE-STREAMS FOR SUSTAINABLE PACKAGING IN THE BLUE BIOECONOMY: INSIGHTS FROM THE AQUAPACK PROJECT

T Tsironi, E Velliou, I Arnaudin, I Župan, T Šarić, M Koutinas, ...
Publishing year: 2025
Journal article
Aquaculture Europe 2025 Book of abstracts, 1819-1820, 2025, 2025
Google Scholar
Pages 1819-1820
The AQUAPACK project aims to develop active and sustainable packaging materials based on the selection of suitable aquatic biomass (micro- and macro-algae, fish processing side streams and by-catch) with the aim of obtaining appropriate raw materials (carbohydrates, proteins, fatty acids etc.) and biopolymers, to produce biodegradable packaging systems specifically tailored for the food and cosmetic industry. The project is at the interface between research and commercial exploitation and will generate knowledge and innovations to promote growth of the sustainable blue bioeconomy, preserving marine resources and ecosystems. By valorising underutilized marine resources, AQUAPACK is expected to contribute significantly to reducing reliance on fossil-based plastics, closing nutrient loops, and driving innovation through bio-based packaging alternatives.;

790
Unique publications
35.4%
Open access (280 publications; 236 without information)
42.4%
With other institutions (335 publications; 275 without information)

H-Index Reports

Index type Scopus Google Scholar Web of Science
H-index 50 64 9
H5-index 31 30 7
H10-index 44 49 8

Publications per year and source

No description yet.
Organization name
Department of Chemical Engineering
Parent orgunit
Faculty of Geotechnical Sciences and Environmental Management
Organization type
Department