ΕΛ EN
Home | People | Adamou, Panayiota
14
Scholarly Works
71%
OA Ratio
0%
Collaborative Ratio
Scholar

Adamou, Panayiota

Department of Chemical Engineering

0
H-index (Google Scholar)
-
Scholar Citations

Scholarly Works

Research Output

Recent Publications

Experimental and computational investigation of carbon-free hydrogen carriers for green H2 generation in batch systems

Adamou, Panayiota, Constantinou, Achilleas
Publishing year: 2026
Thesis Repository
The scientific and research community has put great effort to find alternative solutions regarding the global shift from conventional carbon-based fuels to sustainable energy sources to mitigate climate change. A promising solution is the utilisation of hydrogen (H2) as fuel, which is green and carbon-neutral, however, its production, storage and transportation challenges, hinders its widespread adoption as an energy carrier. Thus carbon-free hydrogen carriers can be used, offering better control and the potential of generating H2 on-site. Hence, the scope of the present work is the experimental and theoretical investigation, using computational fluid dynamics (CFD) of hydrous hydrazine (HH) and ammonia borane (AB) as carbon-free hydrogen carriers for green H2 production in batch reactor systems. Initially, the catalytic decomposition of HH was examined using a commercial catalyst in a lab-scale batch system, evaluating the effect of stirring rate, temperature, catalyst mass, HH concentration and NaOH concentration. The optimum conditions led to a H2 yield above 90%. A 0-D model was developed, integrating a power law reaction model, which validated well the experimental data and following, 2-D simulations of the reactor system were conducted providing velocity, temperature, HH and catalytic particles profiles distribution within the reactor. A subsequent study on HH catalytic decomposition was carried out using a lab-synthesised catalyst, evaluating the same experimental par...

Application of CFD, statistical analysis and DoE for optimising H2 generation through ammonia borane catalytic hydrolysis: A novel approach for multiobjective optimisation

Adamou, Panayiota, Afantitis, Antreas, Barlocco, Ilaria, Chen, Xiaowei, Christodoulou, Charalampos, Delgado, Juan J., Dimitratos, Nikolaos, Harkou, Eleana, Manos, George, Michael, Antreas, Mintis, Dimitris, Villa, Albert...
Publishing year: 2025
Journal article
Chemical Engineering Journal, 2025, Volume 525
Repository
A non-noble metal catalyst (Cu/NiO/TiO2) was used for the hydrolysis of ammonia borane (AB), studying the effect of temperature, AB concentration and substrate to catalyst (Sub:Cat) molar ratio. A zero-dimensional (0-D) model was developed using COMSOL Multiphysics for the validation of the experimental data, with a maximum error (17 %) observed at the highest studied concentration. Using the Isalos Data Analytics platform, a Box-Behnken Design (BBD) was implemented, studying complex interactions among the three studied parameters on the three critical response variables: reaction time, turnover frequency (TOF), and hydrogen (H2) yield. Main effects plots revealed nonlinear relationships between each factor and the mean of reaction time. Additional experiments were integrated into the statistical analysis, revealing how one parameter or interaction between the studied parameters influence the response values. Sub:Cat was found to be an influential term at all cases. A multiobjective optimisation analysis was conducted to identify optimal experimental conditions, showcasing a consistent trend favouring a temperature of 50 °C, Sub:Cat ratios around 1100–1150, and AB concentrations of 74–78 mM, generating H2 yields above 74.4 % and reaction times below 30 min. Changing one-factor-at-a-time would have required 27 experiments, while with the use of BBD, only 13 experiments were needed to capture the main, quadratic, and interaction effects, reducing the experimental studies by alm...

Ultrasonic reactor set-ups and applications: A review

Adamou, Panayiota, Constantinou, Achilleas, Dimitratos, Nikolaos, Harkou, Eleana, Villa, Alberto
Publishing year: 2024
Journal article
Ultrasonics sonochemistry, 2024, Volume 107
Repository
Sonochemistry contributes to green science as it uses less hazardous solvents and methods to carry out a reaction. In this review, different reactor designs are discussed in detail providing the necessary knowledge for implementing various processes. The main characteristics of ultrasonic batch systems are their low cost and enhanced mixing; however, they still have immense drawbacks such as their scalability. Continuous flow reactors offer enhanced production yields as the limited cognition which governs the design of these sonoreactors, renders them unusable in industry. In addition, microstructured sonoreactors show improved heat and mass transfer phenomena due to their small size but suffer though from clogging. The optimisation of various conditions of regulations, such as temperature, frequency of ultrasound, intensity of irradiation, sonication time, pressure amplitude and reactor design, it is also discussed to maximise the production rates and yields of reactions taking place in sonoreactors. The optimisation of operating parameters and the selection of the reactor system must be considered to each application's requirements. A plethora of different applications that ultrasound waves can be implemented are in the biochemical and petrochemical engineering, the chemical synthesis of materials, the crystallisation of organic and inorganic substances, the wastewater treatment, the extraction processes and in medicine. Sonochemistry must overcome challenges that consider...

Hydrous hydrazine decomposition over Rh/Al2O3 catalyst: Experimental and CFD studies

Adamou, Panayiota, Bellomi, Silvio, Chen, Xiaowei, Constantinou, Achilleas, Delgado, Juan J., Dimitratos, Nikolaos, Harkou, Eleana, Manos, George, Villa, Alberto
Publishing year: 2024
Journal article
Chemical Engineering Journal, 2024, Volume 493
Repository
Addressing challenges associated with fossil fuels emissions and contributing to a sustainable energy future is the main objective of the science community. Hydrogen (H2) is emerging as a promising future fuel promoting clean energy production. In this work, the catalytic decomposition of hydrous hydrazine was evaluated using a commercial 0.5 wt% Rh/Al2O3 catalyst for H2 generation. The reaction conditions for the catalyst were optimised in a batch reactor, and computational fluid dynamics (CFD) simulations were performed, accurately validating the results. CFD studies were also conducted on velocity and temperature magnitude and, reactant concentration and catalytic particles distribution in the reactor area, highlighting the key role of the systems’ uniformity on maximum H2 generation. This work is the first, to our knowledge, which uses computational simulation on hydrous hydrazine decomposition, contributing to better understand the reaction kinetics, providing insights for practical hydrogen applications.

Effect of Polyethylene Pyrolysis Oil Hydrotreatment on the Pt/Al2O3 Catalyst: Experimental Characterization

Adamou, Panayiota, Al-Salem, Sultan Majed, Bumajdad, Ali, Constantinou, Achilleas, De Jong, Xander, Harkou, Eleana, Van Haute, Maarten
Publishing year: 2024
Journal article
ACS Omega, 2024, Volume 9O, Issue 17
Repository
Pages 19057-19062
The dramatic increase in plastics production, coupled with a low recycling and recovery rate, has been a major challenge for sustainable practices and combating climate change. Hydrotreatment processing to upgrade fuel oils is a well-known process in the petroleum industry. In this work, we aim to investigate the catalyst properties before and after the hydrotreatment of pyrolysis oil derived from plastics, namely, linear low-density polyethylene, as no such report is available in the literature. Granular and powder forms of the Pt/Al2O3 catalyst were used in this study with characterization methods executed as such: transmission electron microscopy, X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), thermogravimetric analysis (TGA), and IR-RIS. XRD data show that the crystallinity of the catalyst support was unaffected by the hydrotreatment without any residues left, as the characteristic diffraction peaks were indicated for the crystalline phase of the support as 37.4, 39.8, 46.3, and 67.3°. In addition, the TGA experiments revealed that the carbon deposition on the spent catalyst was higher, as indicated by the higher weight loss (15.359%) compared to the fresh catalyst sample (11.43%). XPS analysis showed that the carbon deposition is more intense on the granular spent catalyst, as the intensity of the peaks is some 15 times greater than the peaks from the fresh catalyst. Also, compared to the observed peaks of the powder catalyst, less coke is formed. The b...

14
Unique publications
71.4%
Open access (10 publications; 3 without information)
0%
With other institutions (0 publications; 14 without information)

H-Index Reports

Index type Scopus Google Scholar Web of Science
H-index 0 0 0
H5-index 0 0 0
H10-index 0 0 0

Publications per year and source

No description yet.
Faculty
Faculty of Geotechnical Sciences and Environmental Management
Department
Department of Chemical Engineering