Scholarly Works
Research Output
Recent Publications
Parametric Study of Oil-Water Dispersion Separation in Horizontal Pipelines Using a Mechanistic Model
Publishing year: 2025
Conference paper
21st International Conference on Multiphase Production (ISAVFT), 2025
Repository
Oil-water dispersed flows are common in the petroleum industry. While gravity-driven separation enables phase segregation, persistent settling layers reduce separation efficiency. This study conducts a parametric investigation using a mechanistic model to identify factors contributing to settling layer persistence. Droplet size, dispersed-phase fraction, and pipe diameter are varied to evaluate their effects. Results, presented as separation regime maps, identify the dominant separation mechanism under different conditions. Smaller droplets, higher dispersed-phase fractions, and larger pipe diameters promote settling layer persistence. A near-linear relationship is also found between droplet size and critical pipe diameter at which a persistent settling layer is observed.
Mechanistic modelling of separating dispersions in pipes using model-based design of experiments techniques
Publishing year: 2024
Journal article
Chemical Engineering Science, 2024, Volume 284
Repository
This work presents a parametric study on a mechanistic model for separating liquid–liquid dispersions in pipes. The model considers drop-settling, drop-interface coalescence and drop-drop coalescence, predicting the evolution of four characteristic layers during separation. Parameter estimation, parametric sensitivity analysis (PSA), and model-based design of experiments (MBDoE) techniques are employed to acquire precise parameter estimates and propose optimal experimental conditions, thereby enhancing the accuracy of existing models. Experimental data from literature using oil-in-water dispersions are used for parameter estimation. PSA reveals regions of high sensitivity of the model outputs to uncertain parameters, which are corresponding to favourable sampling locations. Manipulating the mixture velocity, the dispersed phase fraction, and the layer heights at the inlet influences these sensitive regions. Clustered measurements around highly sensitive regions in the pipe enhance the information content they provide. MBDoE demonstrates that either of the A-, D-, or E-optimal experimental design criteria improves the expected parameter precision.
Effect of coalescence models on the prediction of the separation of dispersed oil-water pipe flows
Publishing year: 2023
Journal article
33rd European Symposium on Computer Aided Process Engineering, 2023, Volume 52
Repository
Pages 1101-1106
The effect of coalescence models on the prediction of the separation of dispersed oil-water pipe flows was assessed using a one-dimensional mechanistic model. The mechanistic model predicts the formation and evolution of four characteristic layers along the pipe: a pure water layer at the bottom, a flotation/sedimentation layer, a dense-packed zone, and a pure oil layer on the top. It was shown that the film drainage coalescence model by Jeelani and Hartland (1994) that considers interfacial mobility produces good predictions at low mixture velocity, but it depends on the flowrate. The asymmetric film drainage coalescence model by Henschke et al. (2002) is independent of the mixture velocity and the dispersed-phase fraction, and produces reasonable predictions. There was small deviation between the model outputs in the presence of the four characteristic layers, but further investigation of the regions where a single dense-packed layer persists is required.
A mechanistic model for the prediction of flow pattern transitions during separation of liquid-liquid pipe flows
Publishing year: 2022
Journal article
International Journal of Multiphase Flow, 2022, Volume 155
Repository
A one-dimensional mechanistic model that predicts the flow pattern transitions during the separation of dispersed liquid-liquid flows in horizontal pipes was developed. The model is able to capture the evolution along the pipe of the four characteristic layers that develop from initially dispersed flows of either oil-in-water or water-in-oil at a range of mixture velocities: a pure water layer at the bottom, a settling (flotation/sedimentation) layer, a dense-packed zone, and a pure oil layer on the top. Coalescence correlations from literature were included in the model to predict the drop growth due to binary drop coalescence and the coalescence rate of drops with their corresponding interface. The model predictions on the evolution of the heights of the different layers were partly compared against available experimental data obtained in a pilot scale two-phase flow facility in a test section of 0.037 m inner diameter using tap water and an oil of density 828 kg m−3 and viscosity 5.5 mPa s as test fluids, and in a 0.1 m inner diameter test section using water and an oil of density 857 kg m−3 and viscosity 13.6 mPa s. It was shown that the evolution of the four characteristic layers depends on the rates of drop settling and drop-interface coalescence. Oil-in-water dispersions separated faster than water-in-oil ones, while dispersions with smaller drop-sizes were more likely to exhibit depletion of the dense-packed zone.
Simplified mechanistic model for the separation of dispersed oil-water horizontal pipe flows
Publishing year: 2019
Conference paper
BHR 19th International Conference on Multiphase Production Technology, 2019
Repository
A mechanistic model that predicts the separation of oil-water dispersed horizontal pipe flows was investigated. Different droplet diameter averages were implemented in the model and the accuracy of the resulting predictions was assessed by comparing each case against experimental data. The experimental data used was obtained in a pilot scale two-phase flow facility using tap water and oil (828 kg m-3, 5.5 mPa s) as test fluids. The results show that the separation length is highly sensitive to the drop diameter, but further investigation is required to determine which drop diameter average produces more accurate predictions of the flow profile.
5
Unique publications
40%
Open access (2 publications; 1 without information)
20%
With other institutions (1 publications; 1 without information)
H-Index Reports
| Index type | Scopus | Google Scholar | Web of Science |
|---|---|---|---|
| H-index | 2 | 2 | 1 |
| H5-index | 1 | 1 | 1 |
| H10-index | 2 | 2 | 1 |
Publications per year and source
No description yet.
- Faculty
- Faculty of Geotechnical Sciences and Environmental Management
- Department
- Department of Chemical Engineering