Scholarly Works
Research Output
Recent Publications
Building Digital Twin – Digitalisation of the Thermo-accumulator Used for the Building’s Heating
Publishing year: 2026
Conference paper
Lecture Notes in Civil Engineering, 2026, Volume 775 LNCE
Scopus
Pages 123-133
When creating a digital twin of a building, all engineering system devices within the building must be digitised and integrated into the numerical model. This research focused on describing the processes occurring in a heat storage system, which was designed to accumulate heat during the summer period and utilise it by the building’s heating during the cold period. This is a long-term acting heat storage system with a soil-type filler. Several stages of the thermal energy storage system operation were distinguished: charging, discharging, and heat retention. During all these processes, heat exchange with the environment occurs. Typically, it is heat loss to the environment. Experimental research was performed in field conditions to analyse the mentioned processes. After each charge, the heat was dissipated in the soil volume. The output signals of the sensors were recorded and analysed. It was noticed that two temperature measurement sensors are necessary to estimate the type of work regime and charge or discharge intensity. More sensors are needed to determine the amount of stored energy more accurately. Creating a validated numerical model and comparing measured temperatures with simulated values at the same points enables a highly accurate assessment of the stored energy in the accumulator, as well as the description and forecast of parameter changes. By integrating the numerical model of the accumulator into the building’s digital twin and combining it with building engin...
Assessing Borehole Thermal Energy Storage Patterns for Renewable Heating Solutions
Publishing year: 2026
Journal article
International Conference on Renewable and Clean Energy, 175-183, 2026, 2026
Google Scholar
Pages 1-6
Abstract [eng]
As the global energy transition advances, the heating sector accounted for approximately 51% of energy consumption in 2023, predominantly relying on fossil fuels. Renewable energy sources, including solar power, wind, and thermal energy, offer promising alternatives but face challenges with large-scale, longterm energy storage to balance the intermittent supply with heating demand. Borehole Thermal Energy Storage (BTES) presents a highly suitable option for addressing seasonal mismatches between energy supply and demand.
Adaptive Deep Reinforcement Learning Optimization Design Process for Hybrid Pin-Fin Microchannel Heat Sink Based on Hybrid Neural Network Acceleration
Publishing year: 2026
Journal article
Chinese Journal of Electronics 35 (2), 423-433, 2026, 2026
Google Scholar
Thermal performance evaluation of energy piles and energy foundations: A comprehensive review of thermal effectiveness testing methods
Publishing year: 2025
Journal article
Energy and Buildings, 2025, Volume 346
Repository
Energy Geo-Structures integrate ground-heat-exchanger pipe network in structural/foundation elements (energy piles, energy foundations), enabling buildings to exploit shallow geothermal energy. Adoption however, is restrained by thermal effectiveness uncertainty, across varied geological, climatic and operational conditions. A review study presented here consolidates evidence from laboratory, in-situ and operational studies to critically assess the evaluation techniques. Research publications on tests performed on energy piles/foundations are summarized by geographical distribution and the foundation and piping type, as well as exchanger configuration and test protocol. Constant-heat-flux Thermal Response Tests (TRTs) and constant-temperature Thermal Performance Tests (TPTs) dominate the literature. The TRT and TPT characteristics but also the operational tests and measurements are presented in detail. Among important findings are the following: large geographical disparities arise in recorded practice; TRT duration increases with pile diameter and groundwater flow affects predicted effective ground conductivity; TPT results demonstrate that inlet temperature, flow rate, and hydraulic connection architecture greatly affect heat-exchange rate; the limited long-term operational monitoring demonstrates that building load patterns, not soil properties, determine seasonal performance. Based on this review, the authors suggest a future challenge of a unified framework combining sch...
Speckle Analysis in Multimode Optical Fibers for Chemical and Physical Sensing: A Comparative Study of Demodulation Algorithms
Publishing year: 2025
Journal article
IEEE Sensors Journal, 2025, Volume 25, Issue 17
Repository
This article presents a comparative study on the performance of three widely used speckle demodulation algorithms, average intensity algorithm (AIA), normalized inner product coefficient (NIPC), and sum of squared differences (SSDs), for multimode optical fiber sensors under identical experimental conditions. We examine how these algorithms perform when analyzing speckle patterns from a polymer optical fiber exposed to variations in both refractive index and pressure. Unlike prior works that typically focus on a single algorithm applied to a specific sensing task, our study evaluates all three methods side-by-side across the same operational range. Through this approach, we provide insights into each algorithm’s suitability in terms of sensitivity, dynamic range, and computational load. Additionally, we explore how image segmentation into regions of interest (ROIs) can fine-tune sensor response and even reveal directional speckle shifts tied to different physical phenomena. Our findings offer practical guidance for selecting appropriate demodulation techniques in multimodal sensing applications and highlight the potential of speckle-based systems for robust, low-cost, multiparameter fiber-optic sensing.
Smart cooling: Hydrogel-enhanced adaptive jet impingement utilizing through silicon via for integrated microsystems
Publishing year: 2025
Journal article
Applied Thermal Engineering, 2025, Volume 268
Repository
In three-dimensional integrated circuits, variations in power consumption across different regions lead to uneven temperature distribution, which can compromise system stability and reliability. While microchannels etched on the chip's backside are commonly used for cooling, traditional designs provide a fixed cooling capacity and are often inefficient in targeting specific hotspots. Moreover, straight microchannels spanning the entire system can result in overcooling in low-power areas and insufficient cooling in high-power regions. This study presents a novel design of an adaptive jet impingement cooling structure that combines hydrogel, jet impingement heat sink (JIHS) and through silicon via (TSV) technology. The structure features vertical channels and utilizes the thermally induced deformation of hydrogel to achieve adaptive cooling. This design allows the cooler to be strategically placed at hotspots, dynamically adjusting microfluidic injection in response to temperature fluctuations. As a result, overcooling in low-power regions and inadequate cooling in hotspots are mitigated, improving thermal uniformity. Compared to conventional jet impingement heat sinks, the proposed adaptive jet impingement heat sink improves temperature uniformity by 12.21 %, reduces thermal spreading resistance by 13 %, and increases maximum total thermal resistance by only 3.08 %. The maximum pressure drop increases by just 1.28 kPa. Therefore, with the increasingly complex integrated micros...
92
Unique publications
23.9%
Open access (22 publications; 58 without information)
21.7%
With other institutions (20 publications; 59 without information)
H-Index Reports
| Index type | Scopus | Google Scholar | Web of Science |
|---|---|---|---|
| H-index | 16 | 19 | 1 |
| H5-index | 9 | 10 | 1 |
| H10-index | 15 | 17 | 1 |
Publications per year and source
No description yet.
- Faculty
- Faculty of Engineering and Technology
- Department
- Department of Electrical Engineering, Computer Engineering and Informatics