ΕΛ EN
Home | People | Polydorou, Thomaida
47
Scholarly Works
32%
OA Ratio
53%
Collaborative Ratio
Scholar

Polydorou, Thomaida

Department of Civil Engineering and Geomatics

6
H-index (Scopus)
0
Scholar Citations

Scholarly Works

Research Output

Recent Publications

Rheology Characteristics of Self-Compacting Concrete with Mechanically Treated Recycled Concrete Aggregates

Savva P., Nicolaides D., Polydorou T., Petrou M.F., Oikonomopoulou K., Georgiades M., Fikardos A., Karapedis C.
Publishing year: 2026
Conference paper
Fib Symposium, 2026
Scopus
Pages 3111-3120
The utilization of Recycled Concrete Aggregates (RCA) as a replacement for crushed diabase Natural Aggregates (NA) in concrete enhances sustainability and reduces environmental impact. However, incorporating RCA into Self-Compacting Concrete (SCC) mixtures presents challenges due to the sensitive nature of SCC and the reduction in overall performance caused by the RCA’s attached mortar. Therefore, this article examines the application of a mechanical treatment method for the partial removal of the adhered mortar in Recycled Aggregate Concrete (RAC) SCC formulations. Furthermore, this study focuses on SCC-RAC produced with local materials and industrial by-products, specifically replacing limestone filler with unwashed limestone powder, a quarry residue. In addition, pre-soaked in water RCA were incorporated into the mixtures to take advantage of the RCA’S high water absorption potential, for improving the flowability and stability of fresh concrete properties. The experimental program involves a series of small-scale SCC-RAC mixtures incorporating RCA, targeting specific rheological properties, examination of the Bingham parameters (yield stress and plastic viscosity), while aiming for optimal material performance. Results were compared and discussed to assess the synergistic effectiveness of the mechanical treatment method of RAC and internal curing, combined with local materials, in enhancing SCC-RAC rheological performance and its applicability in large-scale concrete thin...

Life cycle assessment of a novel fire-resistant and thermal insulating composite developed by alkali-activation of recycled ceramic tiles and comparison to conventional products

Giannopoulou I., Savva P., Nicolaides D., Polydorou T., Petrou M.F., Demetriou D., Oikonomopoulou K., Valanides M., Fikardos A.
Publishing year: 2025
Journal article
Clean Technologies and Environmental Policy, 2025, Volume 27, Issue 10
Scopus
Pages 5107-5118
This study presents the environmental impact assessment of a newly developed geopolymer composite that combines fire-resistance and thermal insulation. The innovative product is developed through alkali-activation of ceramic titles retrieved from construction demolition waste. A comparative Life Cycle Assessment with conventional market products is performed, based on equivalent thermal and fire resisting performance. The analysis considers the amount of material required to cover a specific exterior wall area that would provide equal thermal insulation and fire-resistance, defining a functional unit that deliberates both properties. The results show that manufacturing the novel geopolymer composite over conventional market products, significantly reduces CO2 emissions and other environmental impacts. This is primarily due to the reuse of waste ceramic tiles, which promotes sustainability in the construction industry. The promising findings of this study encourage the use of construction demolition waste in the development of geopolymer products for added value applications.

Key Aspects Guiding the Research towards the Optimal use of Recycled Aggregate Concrete (RAC) for Concrete Armor Units (CAU)

Stagonas D., Polydorou T., Petrou M.F., Oikonomopoulou K., Georgiades M., Karapedis C.
Publishing year: 2025
Conference paper
Iop Conference Series Earth and Environmental Science, 2025, Volume 1558, Issue 1
Scopus
In the next years, the government of Cyprus is planning to construct a series of breakwaters along the island's coast and several marine infrastructure projects. Limestone, the only locally available natural rock that is suitable as the armor layer in such breakwaters, is currently facing reserve depletion, particularly in certain areas such as the Paphos district. This issue has created the need to expand quarrying activities into new regions, which may negatively affect ecologically signiCicant areas and undermine the Republic of Cyprus' sustainability goals for preserving its natural resources and the environment. Instead, we could replace limestone rock armoring with Concrete Armor Units (CAUs), incorporating aggregates from various sources, including Recycled Concrete Aggregate (RCA). It should be noted that since no steel reinforcement is necessary for CAUs, there will be no concerns for corrosion. The use of RCA in CAU aligns with the EU Sustainable Development Goals and provides a large volume application where waste concrete can be used successfully, signiCicantly contributing to promoting sustainability. This study explores the feasibility of using RCA as a partial or entire replacement of aggregates in optimized Recycled Aggregate Concrete (RAC) mix formulations for CAUs.

Fiber alignment in hybrid fiber reinforced self-compacting UHPFRC

Nicolaides D., Mina A., Polydorou T., Petrou M.F., Demetriou D., Pigiotis P.
Publishing year: 2025
Conference paper
Fib Symposium, 2025
Scopus
Pages 1067-1078
This study investigates a novel electromagnetic field (EMF) application setup to control fiber alignment in hybrid fiber-reinforced self-compacting ultra-high-performance fiber-reinforced concrete. Experimental validation demonstrated that the developed EMF system successfully aligned steel fibers, improving their orientation parallel to the principal stress direction. Three-point bending tests revealed that conventional concrete specimens subjected to EMF fiber alignment exhibited a 58% increase in flexural strength compared to non-aligned specimens. Similarly, EMF-aligned UHPFRC specimens demonstrated over a 50% enhancement in maximum flexural stress. Image analysis confirmed that the novel EMF setup significantly reduced fiber orientation variability, ensuring a more uniform distribution of fibers perfectly aligned at the desired direction.

Evaluation of Self-Compacting Concrete with Industrial Waste

Savva P., Polydorou T., Petrou M.F., Oikonomopoulou K., Georgiades M., Karapedis C.
Publishing year: 2025
Conference paper
Iop Conference Series Earth and Environmental Science, 2025, Volume 1558, Issue 1
Scopus
Self-Compacting Concrete (SCC) is considered a challenging concrete mixture due to its sensitivity to yield stress and plastic viscosity, which ultimately govern the rheological behaviour of the material. Additionally, SCC tends to have a higher cost, which limits its widespread application in construction. One of the main purposes of this study is to reduce production cost without compromising material performance. This article investigates the utilization of local materials and industrial by-products, following a two-stage evaluation process of small-scale laboratory mixtures: successful achievement of rheology targets on fresh state experiments such as Slump Flow, V-Funnel, L-Box and sufHicient behaviour of structural indecrity. Furthermore, the incorporation Viscosity Modifying Agent (VMA) was investigated for enhancing matrix cohesion and mixture stubility, but VMA could also increase yield stress. Based on the results, the effectiveness of limestone powder (LP) replacement and VMA addition in enhancing SCC performance are discussed.

Comparative life cycle assessment of cement production in isolated regions: Insights from regional and global benchmarks

Polydorou T., Petrou M.F., Georgiades M.
Publishing year: 2025
Conference paper
Iop Conference Series Earth and Environmental Science, 2025, Volume 1558, Issue 1
Scopus
The rapid growth of industrialisation and urbanisation has significantly increased the demand for construction materials such as concrete, and consequently, for portland cement. However, in regions like Europe, where ambitious climate targets have been established, the cement industry is under increasing pressure to decarbonise while continuing to meet the rising demand. Although a wide range of decarbonisation strategies have been explored in the literature, their adoption remains challenging in isolated or geographically constrained regions. This study presents a life cycle assessment (LCA) to evaluate the environmental impacts of cement production in isolated regions such as Malta, Iceland, Fiji, and Mauritius, in comparison with European and global averages. The system boundary is defined as "cradle-to-gate,"including raw material extraction, local and international transportation, and manufacturing stages, with a functional unit defined as 1 tonne of cement imported to the isolated region. The LCA was conducted using Activity Browser v2.8, focusing on climate change impact using the IPCC 2021 method. This analysis identifies key environmental hotspots within the cement supply chain and examines the influence of transportation in isolated regions. This study seeks to better identify practical decarbonisation solutions that account for regional constraints such as local resource availability and infrastructural limitations, promoting a more resilient and self-sufficient su...

47
Unique publications
31.9%
Open access (15 publications; 17 without information)
53.2%
With other institutions (25 publications; 17 without information)

H-Index Reports

Index type Scopus Google Scholar Web of Science
H-index 6 5 0
H5-index 5 2 0
H10-index 6 4 0

Publications per year and source

No description yet.
Department
Department of Civil Engineering and Geomatics