ΕΛ EN
Home | People | Koukouvinis, Foivos (Phoevos)
131
Scholarly Works
57%
OA Ratio
37%
Collaborative Ratio
Scholar

Koukouvinis, Foivos (Phoevos)

Assistant professor

Department of Mechanical Engineering and Materials Science and Engineering

28
H-index (Scopus)
3695
Scholar Citations

Scholarly Works

Research Output

Recent Publications

Prediction of Ship Hydrodynamic Resistance: Estimation of Pressure and Shear Distributions With a Soft-Constrained ANN Model

C Lefkiou, P Koukouvinis, S Chatzis
Publishing year: 2026
Conference paper
International Conference on Offshore Mechanics and Arctic Engineering 89541 …, 2026, 2026
Google Scholar

Prediction and optimization of ship-specific hull–duct interaction using Machine Learning

Christoforos Lefkiou, Phoevos Koukouvinis, Sotirios Chatzis, Marinos Charalmbous
Publishing year: 2026
Preprint ORCID

Predicting ship hull flow-field distributions using a soft-constrained ANN model

Christoforos Lefkiou, Phoevos (Foivos) Koukouvinis, Sotirios Chatzis, Stefanos Xyfolis
Publishing year: 2026
Journal article
International Journal of Naval Architecture and Ocean Engineering, 2026
ORCID

1000KM endurance test of HTR all metal flexible wheels

EP Vassilios Papantoniou, Phoevos (Foivos) Koukouvinis, Stylianos Skevakis ...
Publishing year: 2026
Other
ESA ASTRA 2025, 2026, 2026
Google Scholar

Spray process of multi-component gasoline surrogate fuel under ECN Spray G conditions

Hwang, Joonsik, Karathanassis, Ioannis K., Koukouvinis, Foivos (Phoevos), Nguyen, Tuan, Pickett, Lyle M., Powell, Christopher F., Sforzo, Brandon A., Tagliante, Fabien
Publishing year: 2024
Journal article
International Journal of Multiphase Flow, 2024
Repository
As modern gasoline direct injection (GDI) engines utilize sophisticated injection strategies, a detailed understanding of the air-fuel mixing process is crucial to further improvements in engine emission and fuel economy. In this study, a comprehensive evaluation of the spray process of single-component iso-octane (IC8) and multi-component gasoline surrogate E00 (36% n-pentane, 46% iso-octane, and 18% n-undecane, by volume) fuels was conducted using an Engine Combustion Network (ECN) Spray G injector. High-speed extinction, schlieren, and microscopy imaging campaigns were carried out under engine-like ambient conditions in a spray vessel. Experimental results including liquid/vapor penetration, local liquid volume fraction, droplet size, and projected liquid film on the nozzle tip were compared under ECN G1 (573 K, 3.5 kg/m3), G2 (333 K, 0.5 kg/ m3), and G3 (333 K, 1.01 kg/ m3) conditions. In addition to the experiments, preferential evaporation process of the E00 fuel was elucidated by Large-Eddy Simulations (LES). The three-dimensional liquid volume fraction measurement enabled by the computed tomographic reconstruction showed substantial plume collapse for E00 under the G2 and G3 conditions having wider plume growth and plume-to-plume interaction due to the fuel high vapor pressure. The CFD simulation of E00 showed an inhomogeneity in the way fuel components vaporized, with more volatile components carried downstream in the spray after the end of injection. The high vapor...

Quantification of cavitating flows with neutron imaging

Gavaises, M., Heidari-Koochi, M., Karathanassis, Ioannis K., Koukouvinis, Foivos (Phoevos), Spivey, D., Trtik, P., Weiss, L., Wensing, M.
Publishing year: 2024
Journal article
Scientific Reports, 2024, Volume 14
Repository
The current experimental investigation demonstrates the capability of neutron imaging to quantify cavitation, in terms of vapour content, within an orifice of an abruptly constricting geometry. The morphology of different cavitation regimes setting in was properly visualised owing to the high spatial resolution of 16 μm achieved, given the extensive field of view of 12.9 × 12.9 mm2 offered by the imaging set-up. At a second step, the method was proven capable of highlighting subtle differences between fluids of different rheological properties. More specifically, a reference liquid was comparatively assessed against a counterpart additised with a Quaternary Ammonium Salt (QAS) agent, thus obtaining a viscoelastic behaviour. In accordance with previous studies, it was verified, yet in a quantifiable manner, that the presence of viscoelastic additives affects the overall cavitation topology by promoting the formation of more localised vortical cavities rather than cloud-like structures occupying a larger portion of the orifice core. To the authors' best knowledge, the present work is the first to demonstrate that neutron imaging is suitable for quantifying in-nozzle cavitating flow at the micrometre level, consequently elucidating the distinct forms of vaporous structures that arise. The potential of incorporating neutron irradiation for the quantification of two-phase flows in metallic microfluidics devices has been established.

131
Unique publications
56.5%
Open access (74 publications; 36 without information)
36.6%
With other institutions (48 publications; 39 without information)

H-Index Reports

Index type Scopus Google Scholar Web of Science
H-index 28 35 1
H5-index 14 15 1
H10-index 25 31 1

Publications per year and source

No description yet.
Faculty
Faculty of Engineering and Technology
Department
Department of Mechanical Engineering and Materials Science and Engineering
Title
Assistant professor