Scholarly Works
Research Output
Recent Publications
Integrating Geoinformatics and Finite Element Modelling for Structural Assessment of a Cultural Heritage Monument
Publishing year: 2026
Book chapter
Rilem Bookseries, 2026, Volume 64
Scopus
Pages 489-503
Preserving cultural heritage (CH) sites and monuments is essential to safeguard them from natural hazards, environmental degradation, and the effects of aging. Finite element (FE) modelling is a key tool for the structural assessment of cultural heritage sites and monuments. Geoinformatics, traditionally used in other fields, is now increasingly used in numerical modelling, offering significant potential for enhancing structural assessment. This paper presents the integration of FE modelling and geoinformatics for the structural assessment of a monument at an UNESCO, CH site in Cyprus. The collaboration between these two fields enhances the reliability of structural assessments. A comprehensive 3D model was developed in SAP2000 using data from terrestrial laser scanning, UAV and terrestrial photogrammetry, 360° imaging, and handheld photography. The resulting high-resolution, textured mesh was used to derive accurate geometric information for FE model development. The geometry was simplified and converted into a solid model to allow computationally efficient meshing and analysis. Preliminary modal analysis identified key vibration modes, including those influenced by an existing fracture. This model will be calibrated using data from ongoing non-destructive tests (NDT) and dynamic testing, enabling further simulation of structural scenarios such as seismic events. This interdisciplinary approach that is scalable and adaptable to similar heritage sites, improves the reliabilit...
Circular Value Chain Management—Barriers and Opportunities
Publishing year: 2025
Book chapter
Repository
Pages 667-735
This section is devoted to analyzing the construction industry as one of the significant industries within the economy of any country with a high potential for circularity. According to Huovila and Westerholm [1], the buildings and construction sector is an essential contributor to environmental impacts and wealth creation in society, with social consequences. Globally, construction uses 36% of the energy, produces 39% of emissions, up to 40% of waste, and uses 50% of all the extracted materials. This undoubtedly emphasizes the significance of the industry and the necessity to transform it from a linear business model development towards a circular one to maintain the higher added value of the resources already currently in the economic cycle and significantly impact the consumption of primary resources. This section will provide an overview of different obstacles in the industry, followed by gaps in awareness and knowledge of the stakeholders and various case studies carried out during the research to highlight the potential solutions for shifting the mindsets and business models operating within the construction sector. The section also provides high-quality examples of successful study courses that can be integrated into different study programs to prepare highly-professional specialists in the construction industry or provide general knowledge on the industry and it’s potential for circularity for any other stakeholders.
Integration of Remote Sensing Techniques in Civil Engineering
Publishing year: 2024
Conference paper
Proceedings of SPIE the International Society for Optical Engineering, 2024, Volume 13212
Scopus
Remote sensing is a powerful tool in various fields, including civil engineering, due to its ability to provide valuable information, about objects or areas, from a distance. This paper examines the relationship between remote sensing and civil engineering, highlighting its applications, advantages, challenges and limitations. A review was carried out to address the role of remote sensing technologies in the planning, design, construction, and maintenance processes in civil engineering projects. Furthermore, the synergy between remote sensing data and civil engineering is presented through case studies. Finally, this paper addresses future directions, training and education, and collaboration opportunities.
GIS-based Seismic Risk and Loss Estimation platform for Cyprus
Publishing year: 2024
Conference paper
Proceedings of SPIE the International Society for Optical Engineering, 2024, Volume 13212
Scopus
Earthquakes represent a major natural hazard, that can cause substantial human and economic losses, leading to a negative impact on the economic welfare and resilience of communities in seismic-prone areas worldwide, including Cyprus. Considering the significant increase in losses recorded in earthquake-vulnerable areas during the last decade and the requirement for countries to establish tailored civil protection mechanisms to align with EU objectives, there is a pressing socio-economic necessity to create a comprehensive tool for assessing earthquake risks and estimating potential losses in Cyprus. This paper highlights the urgent need for the development of an innovative Seismic Risk and Loss Estimation GIS-based platform for Cyprus in which the expected damage level and economic loss of the built environment including critical infrastructures and cultural heritage (monuments and sites) for various seismic scenarios will be estimated. This paper also presents the methodology to be followed for developing this platform that incorporates well-established seismic risk and loss estimation methodologies with GIS data, aiming to quantify and visualize the damage state, the risk of significant damage as well as the direct economic loss of infrastructure systems in the aftermath of earthquakes. The Cyprus Seismic Risk and Loss Estimation GIS-based Platform is expected to have a positive scientific, economic, and societal impact and it can be used as an important decision tool for...
Evaluation of a thermal consolidation process for the production of enhanced technical fabrics
Publishing year: 2021
Journal article
Machines, 2021, Volume 9, Issue 8
Repository
Fiber reinforced composites are increasingly used in high value applications. A novel technology (NanoWeld® ) enhancing the structural integrity of the interlayer has demonstrated promising results; however, manufacturing issues related to scalability need to be overcome. The developed technology relies on consolidating thermoplastic nanofiber nonwoven veils onto technical dry fabrics through roll-to-roll ultrasonic welding. The enhanced technical dry fabrics can be further processed as any other technical fabrics for the composites industry. An alternative solution for consolidation is proposed here, based on a thermo-compressive approach to address the scala-bility issue. A finite element model has been employed to simulate the operating conditions and provide information for optimization of the process. Its results demonstrate that consolidation is achieved rapidly, indicating that the production rate could be accelerated. The quality of enhanced technical dry fabrics produced using the proposed consolidation assembly has been evaluated using scanning electron microscopy as well as mechanical testing of fiber reinforced composites. The mechanical response of such manufactured composites has been compared against benchmark Nan-oWeld® composites, demonstrating superior performance.
41
Unique publications
41.5%
Open access (17 publications; 11 without information)
31.7%
With other institutions (13 publications; 12 without information)
H-Index Reports
| Index type | Scopus | Google Scholar | Web of Science |
|---|---|---|---|
| H-index | 12 | 15 | 0 |
| H5-index | 1 | 3 | 0 |
| H10-index | 2 | 4 | 0 |
Publications per year and source
No description yet.
- Faculty
- Faculty of Engineering and Technology
- Department
- Department of Civil Engineering and Geomatics
- Title
- Research Fellow