ΕΛ EN
Home | People | Zembyla, Morfo
7
Scholarly Works
86%
OA Ratio
43%
Collaborative Ratio
Scholar

Zembyla, Morfo

Research Associate

7
H-index (Scopus)
-
Scholar Citations

Scholarly Works

Research Output

Recent Publications

Surface adsorption and lubrication properties of plant and dairy proteins: A comparative study

Sarkar A., Andablo-Reyes E., Liamas E., Krop E.M., Zembyla M., Kew B., Gu K.
Publishing year: 2021
Journal article
Food Hydrocolloids, 2021, Volume 111
Scopus
The aim of this work was to compare the surface adsorption and lubrication properties of plant and dairy proteins. Whey protein isolate (WPI) and pea protein isolate (PPI) were chosen as model animal and plant proteins, respectively, and various protein concentrations (0.1–100 mg/mL) were studied with/without heat treatment (90 °C/60 min). Quartz crystal microbalance with dissipation monitoring (QCM-D) experiments were performed on hydrophilic (gold) and hydrophobic polydimethylsiloxane (PDMS) sensors, with or without a mucin coating, latter was used to mimic the oral surface. Soft tribology using PDMS tribopairs in addition to wettability measurements, physicochemical characterization (size, charge, solubility) and gel electrophoresis were performed. Soluble fractions of PPI adsorbed to significantly larger extent on PDMS surfaces, forming more viscous films as compared to WPI regardless of heat treatment. Introducing a mucin coating on a PDMS surface led to a decrease in binding of the subsequent dietary protein layers, with PPI still adsorbing to a larger extent than WPI. Such large hydrated mass of PPI resulted in superior lubrication performance at lower protein concentration (≤10 mg/mL) as compared to WPI. However, at 100 mg/mL, WPI was a better lubricant than PPI, with the former showing the onset of elastohydrodynamic lubrication. Enhanced lubricity upon heat treatment was attributed to the increase in apparent viscosity. Fundamental insights from this study reveal th...

Friction between soft contacts at nanoscale on uncoated and protein-coated surfaces

Sarkar A., Liamas E., Zembyla M., Ettelaie R., Connell S.D.
Publishing year: 2021
Journal article
Nanoscale, 2021, Volume 13, Issue 4
Scopus
Pages 2350-2367
The understanding of friction on soft sliding biological surfaces at the nanoscale is poorly understood as hard interfaces are frequently used as model systems. Herein, we studied the influence of elastic modulus on the frictional properties of model surfaces at the nanoscale for the first time. We prepared model silicone-based elastomer surfaces with tuneable modulus ranging from hundreds of kPa to a few MPa, similar to those found in real biological surfaces, and employed atomic force microscopy to characterize their modulus, adhesion, and surface morphology. Consequently, we used friction force microscopy to investigate nanoscale friction in hard-soft and soft-soft contacts using spherical colloidal probes covered by adsorbed protein films. Unprecedented results from this study reveal that modulus of a surface can have a significant impact on the frictional properties of protein-coated surfaces with higher deformability leading to lower contact pressure and, consequently, decreased friction. These important results pave the way forward for designing new functional surfaces for serving as models of appropriate deformability to replicate the mechanical properties of the biological structures and processes for accurate friction measurements at nanoscale.

Water-in-oil emulsions stabilized by surfactants, biopolymers and/or particles: a review

Sarkar A., Zembyla M., Murray B.S.
Publishing year: 2020
Journal article
Trends in Food Science and Technology, 2020, Volume 104
Scopus
Pages 49-59
Background: Considering the global rise of obesity and food-linked cardiovascular diseases, food industries are often challenged to produce low fat or fat-free products. Incorporation of water in the form of water-in-oil (W/O) emulsions to replace fat offers a promising strategy to address this research challenge. Scope and approach: This review aims to provide succinct insights into the stabilization of W/O emulsions, focusing on interfacial design using surfactants, biopolymers, particles and/or combinations thereof that have been researched in the last decade. Particular emphasis has been given to particle (Pickering) stabilization of water droplets with bio-derived as well as non-bio-derived particles. In addition, the stabilization of W/O emulsions via viscosity modification is also briefly examined. Key findings and conclusions: Although polyglycerol polyricinoleate (PGPR, E476) is considered as the ‘classic’ surfactant when it comes to stabilization of W/O emulsions, the focal point of current research has recently shifted towards the use of particle stabilizers that allow longer term stabilization against coalescence and Ostwald ripening. In particular, Pickering stabilizers that are derived from natural, biodegradable sources, such as zein, cellulose, lignin, starch and polyphenol crystals (curcumin and quercetin), with or without further modification, have attracted burgeoning attention due to the rising popularity of ‘clean-label’ products amongst consumers. Using...

Stability of water-in-oil emulsions co-stabilized by polyphenol crystal-protein complexes as a function of shear rate and temperature

Sarkar A., Lazidis A., Zembyla M., Murray B.S.
Publishing year: 2020
Journal article
Journal of Food Engineering, 2020, Volume 281
Scopus
The process stability of water-in-oil (W/O) Pickering emulsions (10 or 20 wt% water), co-stabilized by 0.14 wt% of polyphenol crystals (curcumin or quercetin) dispersed in a soybean oil phase, plus 2.0 wt% whey protein isolate (WPI) or 0.1–2.0 wt% whey protein microgel (WPM) particles present in the inner aqueous phase, was assessed by measuring the apparent viscosity (η), water droplet size (via light scattering) and microstructural changes (via confocal laser scanning microscopy, CLSM). Stability was measured as a function of temperature (25–50 °C), using a shear rate cycle between 0.1 and 100 s−1 to highlight shear- and time-dependent hysteresis of η. All the emulsions showed shear thinning to some extent, but those without added WPI or WPM particles in the aqueous phase exhibited coalescence at increasing shear rate, that was more pronounced at higher temperatures. Emulsions containing WPI in the dispersed phase were stable, whilst those containing WPM particles showed a decrease in mean droplet size (D4,3) on shearing due to the disruption of the aggregates of droplets, polyphenol crystals and/or WPM particles in the continuous oil phase, but with no droplet coalescence. The low shear rate (0.1 s−1) viscosity showed an increase with increasing WPM particle concentration. This increase, plus CLSM of the emulsions, suggested that the WPM particles increased W/O emulsion stability not only via their adsorption to the inner surface of the water droplets, but possibly also du...

Water-in-oil pickering emulsions stabilized by synergistic particle-particle interactions

Sarkar A., Lazidis A., Zembyla M., Murray B.S.
Publishing year: 2019
Journal article
Langmuir, 2019, Volume 35, Issue 40
Scopus
Here, we report a novel 'double Pickering stabilization' of water-in-oil (W/O) emulsions, where complex formation at the interface between Pickering polyphenol particles adsorbing from the oil side and WPM (whey protein microgel) particles coadsorbing from the aqueous side of the interface is investigated. The interfacial complex formation was strongly dependent on the concentration of WPM particles. At low WPM concentrations, both polyphenol crystals and WPM particles are present at the interface and the water droplets were stabilized through their synergistic action, whilst at higher concentrations, the WPM particles acted as 'colloidal glue' between the water droplets and polyphenol crystals, enhancing the water droplet stability for more than 90 days and prevented coalescence. Via this mechanism, addition of WPM up to 1 wt% gave a significant improvement in the stability of the W/O emulsions, allowing increasing to 20 wt% water droplet fraction. The evidence suggests that the complex was probably formed due to electrostatic attraction between oppositely-charged polyphenol Pickering particles on the oil side of the interface and WPM 'Pickering' particles mainly on the aqueous side of the interface. Interfacial shear viscosity measurements and monolayer (Langmuir trough) experiments at the air-water interface provided further evidence of this strengthening of the film due to the synergistic particle-particle complex formation at the interface.

Water-in-oil Pickering emulsions stabilized by an interfacial complex of water-insoluble polyphenol crystals and protein

Sarkar A., Zembyla M., Radford S.J., Murray B.S.
Publishing year: 2019
Journal article
Journal of Colloid and Interface Science, 2019, Volume 548
Scopus
Pages 88-99
Long term stabilization of water-in-oil (W/O) emulsions remains a particularly challenging problem in colloid science. Recent studies have shown that polyphenols act as Pickering stabilizers at the water-oil interface. In this work we propose a novel way to stabilize water droplets via interfacial complex formation. It was observed that polyphenol crystals (curcumin or quercetin) absorb at the interface and provide stabilization of water droplets for several days; however formation of a polyphenol- whey protein (WPI) complex at the water-oil interface revealed a pronounced improvement in the stabilization. The mechanism of complex formation was tested by subjecting the systems to different environmental conditions, such as ionic strength and temperature. The evidence suggests that the complex is probably stabilized by electrostatic attraction between the oppositely-charged polyphenol particles and protein at the interface, although hydrogen bonding between the two components may also contribute. The resulting stable water droplets have a Sauter mean diameter (D 3,2 ) of approximately ∼22 and ∼27 μm for curcumin and quercetin systems, respectively. Emulsions were more stable at pH 3 than at pH 7, due to either weaker complex formation at pH 7 and/or chemical degradation of the polyphenols at this more alkaline pH. Interfacial shear viscosity measurements confirmed that there was strong interfacial complex formation with aqueous WPI concentrations of ∼0.5 wt.%.

7
Unique publications
85.7%
Open access (6 publications; 0 without information)
42.9%
With other institutions (3 publications; 0 without information)

H-Index Reports

Index type Scopus Google Scholar Web of Science
H-index 7 0 0
H5-index 2 0 0
H10-index 7 0 0

Publications per year and source

No description yet.
Title
Research Associate