ΕΛ EN
Home | People | Georgiou, Elpida
17
Scholarly Works
35%
OA Ratio
29%
Collaborative Ratio
Scholar

Georgiou, Elpida

Research Fellow

Department of Civil Engineering and Geomatics

3
H-index (Scopus)
-
Scholar Citations

Scholarly Works

Research Output

Recent Publications

Experimental investigation of nonplanar beam-slab to shear wall connections under cyclic loading (ERIES-NOBLE project)

Bairán J.M., Duarte N., Murcia-Delso J., Kyriakides N., Ebrahimian H., Bousias S., Georgiou E., Stathas N., Luna Castilla P.E., Jalayer F., Biskinis D., Chrysostomou C.
Publishing year: 2026
Conference paper
Fib Symposium, 2026
Scopus
Pages 61119-6128
It is very common in existing or newly designed RC buildings that beams are connected to shear walls (individual or core-type) in the out-of-plane (i.e., weak) direction. Little attention has been paid on the seismic performance of this type of connections with very limited experimental research up to date. Previous experimental tests on RC joints mainly focused on beam-column, coplanar beam-wall, and slab-column joints. Furthermore, Eurocode 8, as well as other international seismic codes, are silent regarding the design and detailing of these joints. In the framework of the EU-funded project ERIES “Engineering Research Infrastructures for European Synergies 2022-2026”, ERIES-NOBLE project investigates the seismic performance of nonplanar beam-slab to wall interior joints through three full-scale tests. The tests were conducted at the Structures Laboratory (STRULAB) of the University of Patras (Greece), where the specimens were tested under quasi-static cyclic loading in displacement control. The specimens comprise a segment of a shear wall (section 1500x250mm) starting from the mid-height of a floor up to the mid-height of the next floor (points of contraflexure for bending of the wall in its weak direction), with a total specimen height of 3.05m. The beams (section 250x450mm) are also included up to their point of contraflexure (mid-length of the beam), with a total specimen length of 5.40m. Slab has a thickness of 150mm. Steel reinforcement and detailing differs in each s...

PARAMETRIC STUDY AND FRAGILITY CURVES FOR EXISTING RC FRAME BUILDINGS RETROFITTED WITH RC INFILL WALLS

Pitilakis D., Kyriakides N., Georgiou E., Petridis C., Chrysostomou Z.C.
Publishing year: 2025
Conference paper
Compdyn Proceedings, 2025
Scopus
Pages 5832-5843
This research investigates the performance of existing reinforced concrete (RC) frame buildings retrofitted with RC infill walls under different earthquake inputs at various acceleration levels. The seismic retrofitting of existing multi-bay RC frame buildings by converting selected bays into new RC infill walls, was studied experimentally on a full-scale specimen within the SERFIN project. A series of experiments were conducted at the European Laboratory of Structural Assessment (ELSA) of the Joint Research Centre (JRC). The aim of the experiments was to assess the efficiency of the retrofitting method and to examine the optimal amount of RC wall web reinforcement, as well as the connection details between the new walls and the bounding frame. To complement the experimental findings and further study the interaction between the RC infills and the bounding frame both at the global and local levels, a parametric study was conducted by reducing the number of dowels, starting from a spacing of 100mm (monolithic) to no dowels. The parametric study was performed by incremental dynamic analyses on a two-dimensional (2D) finite element (FE) model, that was calibrated using the experimental results obtained from the full-scale experiment. Seismic inputs and levels impact on the performance of this retrofitting method were evaluated, with the aim of examining earthquake input’s effects on fragility curves. Fragility curves were computed for RC frames infilled with RC infill walls usin...

Performance-Based Numerical Analysis at Various Hazard Earthquake Levels for the Retrofitting of Reinforced Concrete Frames with Reinforced Concrete Infill Walls

Chrysostomou, Christis, Georgiou, Elpida, Kyriakides, Nicholas
Publishing year: 2023
Conference paper
International Symposium of the International Federation for Structural Concrete, 2023
Repository
The performance of reinforced concrete (RC) infill walls for the seismic retrofitting of existing RC-frame buildings is evaluated at various hazard earthquake levels in this research work. The seismic retrofitting of existing multi-storey multi-bay RC frame buildings by the conversion of selected bays into new RC infill walls was studied experimentally within the SERFIN project through a series of experiments, which took place at the European Laboratory of Structural Assessment (ELSA). This was the first time that a full-scale experiment of this type of specimen was performed. This experiment aimed to study the efficiency of the retrofitting method and to examine the required amount of RC wall web reinforcement as well as the connection details between the wall and the bounding frame. To complement the experimental results and to study the interaction between the RC infills and the bounding frame both at the global and local level, a parametric study was performed by reducing the number of dowels starting from a spacing of 100 mm (monolithic) to no dowels. The parametric study was performed by nonlinear response-history analyses of a two-dimensional (2D) finite element (FE) model that was calibrated using the experimental results obtained from the full-scale experiment. The numerical results of the parametric study showed that the number of dowels used in the experimental study can be reduced significantly making the use of this method more attractive. The results from the pa...

Numerical simulation of RC frames infilled with RC walls for seismic strengthening of existing structures

Chrysostomou, Christis, Georgiou, Elpida, Kyriakides, Nicholas
Publishing year: 2022
Journal article
Bulletin of Earthquake Engineering, 2022
Repository
Although it is evident that the RC infill wall is an economic and practical way to improve the lateral strength of framed structures and a retrofitting method for existing buildings to withstand earthquake loads, there are still a lot of limitations regarding their application. Codes do not provide any guidance for their design and detailing or specific regulations for their interaction with the bounding frame. Furthermore, specific directions do not exist for the modelling or evaluation of frame bays converted into RC walls, depending on the type and details of the connection. A representation of the real behaviour of the wall and its interaction with the bounding frame during an earthquake is necessary to provide more accurate guiding information. For this aim, numerical models of this structural system were developed and are presented in this paper. The experimental results of the project SERFIN, which was a full-scale four-storey model tested with the pseudo-dynamic method at the ELSA facility of the Joint Research Centre in Ispra, were used to calibrate the numerical models. Two-dimensional (2D) frames were modelled in DIANA FEA, and nonlinear transient analyses were performed to simulate the experimental results obtained from the SERFIN full-scale experiment. In this paper, the FE model simulation of the test specimen is presented along with a comparison between the experimental results and the numerical ones. It was concluded that the developed numerical models capture...

Nonlinear numerical parametric study of the number and arrangement of dowels connecting the wall to the bounding frame for the seismic strengthening of RC frames with RC infill walls

Chrysostomou, Christis, Georgiou, Elpida, Kyriakides, Nicholas
Publishing year: 2022
Journal article
Bulletin of Earthquake Engineering, 2022, Volume 20, Issue 8
Repository
Pages 3821-3862
The seismic retrofitting of existing multi-storey multi-bay reinforced concrete (RC) frame buildings by the conversion of selected bays into new RC infilled walls is the subject of this research work. The contribution of dowels that connect a new RC infill wall to the surrounding existing RC frame members was studied through a parametric study. The parametric study was performed by nonlinear response-history analyses of a finite element (FE) model. A two-dimensional (2D) frame was modeled, and analyses were performed to calibrate it using the experimental results obtained from a full-scale experiment. The description of the experiment, the experimental results, and the FE model simulation of the test specimen are presented in Georgiou et al. (2018), Georgiou et al. (2022) and Kyriakides et al. (2015) along with a comparison between the experimental results and the numerical ones. Based on the experimental results it was concluded that the number of dowels used in the experiment resulted in a monolithic behavior of the RC infilled frame. To complement the experimental results and to study the interaction between RC infills and the bounding frame both at the global and local level, a parametric study was performed by reducing the number of dowels starting from a spacing of 100 mm (monolithic) to no dowels. The numerical results of the parametric study show that the number of dowels used in the experimental study can be reduced significantly making the use of this method more at...

Correction to: Numerical simulation of RC frames infilled with RC walls for seismic strengthening of existing structures

Chrysostomou, Christis, Georgiou, Elpida, Kyriakides, Nicholas
Publishing year: 2022
Journal article
Bulletin of Earthquake Engineering, 2022, Volume 20, Issue 5
Repository
This correction is published as vendor overlooked several proof corrections. Original article has been corrected.

17
Unique publications
35.3%
Open access (6 publications; 6 without information)
29.4%
With other institutions (5 publications; 6 without information)

H-Index Reports

Index type Scopus Google Scholar Web of Science
H-index 3 0 0
H5-index 2 0 0
H10-index 2 0 0

Publications per year and source

No description yet.
Faculty
Faculty of Engineering and Technology
Department
Department of Civil Engineering and Geomatics
Title
Research Fellow