ΕΛ EN
Home | People | Stassis, Andreas
24
Scholarly Works
4%
OA Ratio
50%
Collaborative Ratio
Scholar

Stassis, Andreas

Dr

Department of Mechanical Engineering and Materials Science and Engineering

6
H-index (Scopus)
417
Scholar Citations

Scholarly Works

Research Output

Recent Publications

Moving from Air Source Heat Pumps to Ground Source Heat pumps: an environmental investigation of different types Ground Heat Exchangers

PC Lazaros Aresti, Georgios Florides, Christos Makarounas, Andreas Stassis ...
Publishing year: 2022
Conference paper
ESCC 2022, 2022, 2022
Google Scholar

Economic Evaluation of New-type Energy Geo-structures in Residential Buildings. A Case Study in Moderate Mediterranean Climate

Aresti, Lazaros, Christodoulides, Paul, Florides, Georgios A., Stassis, Andreas
Publishing year: 2022
Conference paper
Symposium on Circular Economy and Sustainability, 2022
Repository
Shallow Geothermal Energy Systems (SGESs) are Renewable Energy Systems (RES), which are applied in the residential sector through the use of Ground Source Heat Pumps (GSHPs). GSHPs are coupled with Ground Heat Exchangers (GHEs), where heat is absorbed or rejected through a network of pipes in the ground. GSHPs have not yet thrived in the RES market because of their high initial costs and long payback periods. Two Energy Geo-Structure (EGS) systems, in specific the foundation (or energy) piles and the foundation bed of a residential building in moderate climate Mediterranean conditions in the island of Cyprus, were computationally modeled by Aresti et al. [1]. A theoretically typical house with nearly Zero Energy Building (nZEB) characteristics was examined, with estimated heating and cooling loads used as inputs to investigate the performance of the EGS-GSHP systems. Both systems were shown to exhibit steady performance and high Coefficient of Performance (COP) values, making them an alternative RES solution for integration in residential building. In this study the above-mentioned systems were evaluated economically by comparison with a conventional high- and low-performance Air Source Heat Pump (ASHP) systems. Although various methods could be used to evaluate the economic benefits of the systems, to simplify the study, only the difference in the cost of the two systems is used here through the Simple Payback Period (SPP) and the Discounted Payback Period (D...

A cost and environmental impact analysis of Ground Source Heat Pumps in European climates

Aresti, Lazaros, Christodoulides, Paul, Florides, Georgios A., Makarounas, Christos, Stassis, Andreas
Publishing year: 2022
Conference paper
International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, 2022
Repository
Ground Source Heat Pumps (GSHPs) are used for space heating and cooling. They form a Renewable Energy System (RES), combined with Ground Heat Exchangers (GHEs) to extract or reject heat from/to the ground. GHEs come in various types such as vertical or horizontal. Compared to conventional Air Source Heat Pumps (ASHPs), GSHPs, although having a higher installation cost, exhibit a higher coefficient of performance (COP). The aim of this paper is to address whether it is economically feasible to install a GSHP as an alternative to an ASHP. In addition, as the environmental impact of a system does not lie in a single aspect, e.g., the cost or COP, it is also useful to identify whether a GSHP system is indeed a sufficiently overall greener solution than an ASHP system. To this end, a case study of a residential building with nearly Zero Energy Building (nZEB) characteristics, for certain heating and cooling loads is considered in Mediterranean, Central and Northern Europe climate conditions. Using GLD software, a GSHP system is studied for a typical vertical U-tube GHE configuration to estimate the length of the boreholes and the COP of the systems. Then, an environmental impact analysis is presented for different GSHP systems in comparison to ASHP systems. The systems undergo a Life Cycle Analysis (LCA), with the annual heating and cooling load as functional unit. The openLCA software is used with the ReCiPe method with a mid-point perspective. The Global Warming Pot...

Monolithic fibre lasers developed using the plane-by-plane femtosecond laser inscription method

Aubrecht, Jan, Honzátko, Pavel, Kalli, Kyriacos, Kanagaraj, Nithyanandan, Kašík, Ivan, Peterka, Pavel, Stassis, Andreas, Theodosiou, Antreas
Publishing year: 2019
Conference paper
2019 SBMO/IEEE MTT-S International Microwave and Optoelectronics Conference, IMOC 2019, 2019
Repository
In this paper we present the development of monolithic fibre lasers advanced using the plane-by-plane femtosecond laser inscription method. We present lasers designed for operation in the near- and mid-infrared wavelength ranges. We also present recent results regarding the development of polarizing elements, such as tilted fibre Bragg gratings, in order to realise pulsed fibre lasers.

Low-loss Polymer Optical Components and Cladding Interferometric Devices Inscribed Using Femtosecond Laser Inscription

Ioannou, Andreas, Kalli, Kyriacos, Stassis, Andreas, Theodosiou, Antreas
Publishing year: 2019
Conference paper
IEEE International Conference on Electrical Engineering and Photonics, Saint Petersburg, 2019
Repository
We present the development of low-loss polymer optical fiber components and interferometric devices in perfluorinated multimode fibers like CYTOP and silica fibers, respectively. This includes the inscription of usable fiber Bragg gratings, chirped gratings and Fabry-Perot cavities in multimode gradient index fiber using a femtosecond laser inscription. We present the successful demonstration of interferometric devices such as Mach-Zehnder filters and Fabry-Perot cavities inscribed in the cladding of a single mode silica optical fiber. The advantages of these particular progressive sensors are discussed.

Femtosecond laser inscribed gratings for monolithic MIR fiber lasers

Aubrecht, Jan, Honzátko, Pavel, Kalli, Kyriacos, Kanagaraj, Nithyanandan, Peterka, Pavel, Stassis, Andreas, Theodosiou, Antreas
Publishing year: 2019
Conference paper
Sixth International Workshop on Specialty Optical Fibers and Their Applications (WSOF), 2019, Volume 11206
Repository
We present our recent developments regarding monolithic fibre lasers, incorporating gratings as reflectors and polarizing elements via the plane-by-plane femtosecond laser inscription method. Designs are considered for continuous and pulsed laser operation in the mid-infrared wavelength range.

24
Unique publications
4.2%
Open access (1 publications; 10 without information)
50%
With other institutions (12 publications; 10 without information)

H-Index Reports

Index type Scopus Google Scholar Web of Science
H-index 6 7 1
H5-index 1 1 0
H10-index 3 3 1

Publications per year and source

No description yet.
Faculty
Faculty of Engineering and Technology
Department
Department of Mechanical Engineering and Materials Science and Engineering
Title
Dr