Requested Output
16343 unique publications
P1. 17.75 Realizing Digital Transformation in Health: Findings From the TRANSITION Project
Publishing year: 2025
Journal article
Journal of Thoracic Oncology 20 (10), S248-S249, 2025, 2025, Volume 20, Issue 10
Google Scholar
Pages S248-S249
Methods
The TRANSiTION training has been made primarily available to 14-European Member States. The project allowed recruitment through participating cancer centers and from eligible individuals. Eligible participants to the program met specific pre-defined requirements. Following the introduction of the training in the EU, the project has been globally released allowing participants to sign up for the training. The program has been comprehensively evaluated through the adoption of the CIPP Evaluation Model (Context, Input, Process, and Product) that included measurements before and after the training on the following: o Learning Objective Review Instrument (LORI). o Online Readiness Questionnaire for learners (provides feedback and readiness score). o Technology Acceptance Model (TAM v1) questionnaire to assess acceptability. o Post-Study System Usability Questionnaire (PSSUQ v3) for usability …
P05. 05. A INTEGRATED MULTI-OMICS AND MULTI-SPECTRAL PROFILING OF PLASMA EXTRACELLULAR VESICLES REVEALS HIGHLY ACCURATE LIQUID BIOPSY BIOMARKERS FOR GLIOMA DIAGNOSIS.
Publishing year: 2025
Journal article
Neuro-Oncology 27 (Supplement_3), iii65-iii65, 2025, 2025, Volume 27, Issue Supplement_3
Google Scholar
Pages iii65-iii65
BACKGROUND
In glioblastoma (GBM) patients two factors are relevant for prediction of survival: MGMT promoter hypermethylation, which improves the patient’s response to temozolomide (TMZ), and the extent of resection (EOR), with a better overall survival (OS) described in patients subjected to gross total resection (GTR). The aim of our study is to analyze the level of concordance between the results obtained with the standard non-quantitative MGMT analysis methods compared to the quantitative real-time method EpiDirect® and to verify whether the different levels (frequencies) of MGMT promoter hypermethylation, assessed by EpiDirect®, can better predict the response to GBM treatment.
MATERIAL AND METHODS
MGMT promoter methylation in GBM IDH1 wt cases diagnosed from 2004 to 2022 in two neurosurgical centers (EOC and Insubria University Hospital, Italy …
Overweight, obesity, and cardiovascular disease in heterozygous familial hypercholesterolaemia: the EAS FH Studies Collaboration registry
Publishing year: 2025
Journal article
2025, Volume 46, Issue 12
Web of Science
Pages 1127-1140
Outbreaks in hematopoietic stem cell transplant units: a systematic review
Publishing year: 2025
Other
Infection Control and Hospital Epidemiology, 2025, Volume 46, Issue 7
Repository
Objective: To identify and present the pathogens and sources of contamination linked to outbreaks within hematopoietic stem cell transplant (HSCT) units. Design: Systematic review. Setting: Inpatient HSCT units. Methods: The PubMed/Medline databases were systematically searched as per the Preferred Reporting Items for Systematic Reviews and Meta-Analysis (PRISMA) guidelines, employing the search terms “stem cell”, “bone marrow”, “transplant”, “transplantation”, “outbreak” and “pseudo-outbreak” from inception until July 31, 2024. Data on the type of event, pathogen involved, and source of contamination were extracted from eligible publications. Results: In total, 39 studies including 387 patients were included in this review. The overall mortality rate was 23%. Pathogens identified included adenovirus, RSV, Pseudomonas aeruginosa, Aspergillus spp., and non-tuberculous mycobacteria (NTM). P. aeruginosa outbreaks were associated with contaminated sanitary fixtures (P = .007) and water (P = .039), outbreaks caused by NTM were associated with water (P = .009), while Aspergillus spp. outbreaks were associated with construction (P < .001). An index case was identified in 36.8% of viral outbreaks (P = .016). Other sources included inadequate disinfection and transmission from visitors. Conclusions: Our study highlights several associations between pathogens involved in HSCT unit outbreaks and their respective sources. Establishing standardized guidelines for unit construction – parti...
Oswaldo Vasquez Ravelo (1959-2024)
Publishing year: 2025
Journal article
Latin American Journal of Aquatic Mammals 20 (1), 74-75, 2025, 2025, Volume 20, Issue 1
Google Scholar
Pages 74-75
Oswaldo E. Vasquez Ravelo, a prominent marine biologist who was deeply involved in whale conservation in the Dominican Republic (DR) and elsewhere, died in Limassol, Cyprus on 15 November, 2024, aged 65. Oswaldo (known to many by his middle name, Emi) was born in Santo Domingo on 5 July, 1959. At the age of just 16 he obtained a scholarship to study in the Soviet Union, so off he went to the USSR as an inexperienced teenager. He recalled traveling by train in a short-sleeved shirt and campana jeans through a vast, cold land that was so foreign to someone from a Caribbean island; he later commented,“I knew how to say only two things in Russian: Where’s the toilet?, and
Optimizing the operation of thermal power plants in Cyprus to prepare for the green transition
Publishing year: 2025
Journal article
Discover Energy 5 (1), 41, 2025, 2025, Volume 5, Issue 1
Google Scholar
Pages 41
The global transition to sustainable energy systems presents a critical challenge, particularly for regions such as Cyprus, which remain heavily dependent on conventional fuels. This study examines the reduction of economic costs and environmental impacts through the optimal management of power generation units and the utilization of natural gas (NG) and hydrogen in electricity production, while also considering the integration of renewable energy sources (RES). Based on actual production data from 2014 to 2023, the analysis focuses on two distinct periods: 2014–2019 and 2020–2023, with the latter characterized by rising fuel costs and greenhouse gas (GHG) emissions. Three power generating units availability scenarios (100%, 65%, and 58%) were developed with and without NG, and economic savings were evaluated through simulations implementing efficient unit commitment (UC) strategies. The …
Optimizing nitrogen, phosphorus, and potassium requirements to improve Origanum dubium Boiss. growth, nutrient and water use efficiency, essential oil yield and composition
Publishing year: 2025
Journal article
Industrial Crops and Products, 2025, Volume 224
Repository
Medicinal and aromatic plant production is popular in the agricultural sector because of the phytochemical compounds that have a powerful effect on people health. The present study examined the impacts of various nitrogen (N: 75, 150, and 300 mg/L), phosphorus (P: 50, 75, and 100 mg/L), and potassium (K: 150, 350, and 550 mg/L) concentration in the nutrient solution (NS) on growth, physiological attributes, antioxidant capacity, nutrient accumulation and essential oil (EO) components in Origanum dubium plants grown in hydroponics. The NPK levels of 150 mg N/L, 75 mg P/L and 350 mg K/L in the NS, an intermediate fertilization scheme, revealed increased K content in the plant tissue. O. dubium grown in N75 levels indicated increased total phenols and antioxidant capacity, increased P, Na, and Cu content, increased water use efficiency and the highest p-cymene content in the EO. In contrast, the N300 levels in the NS, increased N accumulation and total flavonoids in plants, but decreased the main EO component, carvacrol. The K150 levels in the NS decreased plant biomass and caused oxidative stress, indicated by the higher lipid peroxidation, and the acceleration of the terpene's synthesis with the raised carvacrol content. The K550 levels mirrored the highest nutrient use efficiency in plants while the P100 levels impacted the leaf chlorophylls and manganese content. The raise N, P, K in the NS increased mineral accumulation in the plants. Plant biomass and EO yield were not dif...
Optimization of the buffer layer in a 15kV SiC N-type gate commutated thyristor for safe, low-loss switching
Publishing year: 2025
Journal article
Power Electronic Devices and Components, 2025, Volume 11
Repository
This paper explores the design and optimization of the buffer layer in Silicon Carbide (SiC) N-type Gate Commutated Thyristors (GCTs) to enhance low-loss switching and ensure safe operation in ultra high-voltage (over 10 kV) applications. The challenges posed by high dv/dt conditions during turn-off are known to cause snappy behaviour and high reverse current spikes through the cathode, which degrades switching reliability. Using Synopsys Technology Computer Aided Design (TCAD) models, validated against experimental data, the impact of the device design on the switching performance is investigated. By employing a carefully calibrated three-stage buffer design, we significantly reduce the high dv/dt which in turn is shown to alleviate the reverse cathode current caused by snap off effect. Furthermore, switching losses are reduced without substantially impacting the blocking voltage or the on-state voltage drop. Comparing the performance of the proposed design with conventional single buffer designs, the new GCT design demonstrates improved performance in terms of dv/dt control and energy loss during IGCT turn-off (31.8 % and 33.6 % respectively), in exchange for a 3.06 % increase in conduction losses. The results confirm that our proposed ”3-step buffer” design not only suppresses the snap off phenomenon but also extends the applicability of SiC IGCTs to broader high-power switching applications.
Optimization of the Drying Temperature for High Quality Dried Melissa officinalis
Publishing year: 2025
Journal article
Applied Sciences Switzerland, 2025, Volume 15, Issue 9
Repository
The drying temperature is one of the main factors affecting the storage of medicinal and aromatic plants (MAPs). The present study aimed to investigate the impact of different drying temperatures (20, 35, 42, and 49 °C) on Mentha officinalis quality attributes (moisture content, color, chlorophyll content) and the composition of its essential oil (EO), as well as the environmental impact, to determine the optimum drying temperature for this herb. According to the current findings, higher temperatures resulted in shorter drying times. However, this was accompanied by increased energy consumption and higher carbon footprint per hour of operation. Both room temperature (20 °C) and high oven temperature (49 °C) led to a darker colored product (i.e., higher browning index). Drying at 20 °C resulted in a higher EO yield compared to drying at higher temperatures (42 and 49 °C). Furthermore, lower temperatures (20 and 35 °C) and the highest temperature (49 °C) significantly decreased the levels of the two major EO compounds (geranial and neral), whereas both compounds were found in higher levels when the plants were dried at 42 °C. On the other hand, plants dried at 42 °C appeared to have the lowest amount of citronellal, significantly lower than those dried at the other tested temperatures. The results suggest that the optimum temperature for drying M. officinalis is at 42 °C, as it maintained the quality attributes of the dried product while also resulting in high quality EO.
Optimization of a Miniaturized and Rapid Sample Preparation Method for HPLC Quantification of Flavonoids in Honey by Response Surface Methodology
Publishing year: 2025
Other
Food Analytical Methods, 2025, Volume 18, Issue 12
Repository
In this article, the authors were incorrectly listed as Konstantina Stavrou and Atalanti Christou Vlasios Goulas. The correct authorship should read: Konstantina Stavrou, Atalanti Christou, and Vlasios Goulas. The original article has been corrected.
Optimisation of the Fabrication of Sidewall-Implanted Trenches in a 3.3 kV SiC Semi-Superjunction Schottky Barrier Diode
Publishing year: 2025
Conference paper
37th International Symposium on Power Semiconductor Devices and ICs (ISPSD), 2025
Repository
In this paper we demonstrate a fully optimized process flow for silicon carbide semi-Superjunction (semi-SJ) Schottky barrier diodes, achieving high performance with readily available foundry technology. Using SF_6 -based etching, we fabricated 7 μm deep trenches with smooth, well-angled sidewalls (80-85°) and optimized implantation of the trench bottom and sidewalls. Scanning capacitance and atomic force microscopy, combined with TCAD simulations, confirmed the successful sidewall doping implantation. The resulting structures are expected to exhibit an RDSON of 6.2 mΩ⋯ cm2 and a 4 kV breakdown voltage, outperforming planar diodes. These advancements enable seamless integration of semi-SJ technology into SiC power devices, paving the way for next-generation high-voltage applications.
Optimal Operation of Electric Vehicles to Enhance the Flexibility Provision in Active Distribution Grids
Publishing year: 2025
Conference paper
2025 IEEE Kiel Powertech Powertech 2025, 2025
Scopus
The continuously increasing integration of electric vehicles (EVs) introduced significant challenges to modern power systems, while at the same time offering big opportunities for more optimal and effective operation. This study presents an operational day-ahead scheduling optimization framework to mitigate the negative impacts of EV charging while maximizing flexibility services in active distribution networks. The presented framework employs a non-linear optimal power flow model that ensures compliance with network constraints and accommodates EV user preferences. The proposed methodology is validated through realistic test case scenarios to illustrate its operational feasibility. The results reveal that in suburban areas, flexibility during working hours is limited, while flexibility during return-home hours is significantly higher. In general, the increasing adoption of electric vehicles offers substantial potential for effectively managing distribution networks.
Optimal Aerial Imaging Parameters for UAV-Based Inspection and Maintenance of Photovoltaic Installations
Publishing year: 2025
Journal article
Energies, 2025, Volume 18, Issue 21
Repository
Unmanned Aerial Vehicles (UAVs) equipped with thermal and RGB cameras and enhanced by deep learning offer a powerful solution for autonomous photovoltaic (PV) system inspection. However, defect detection performance depends on flight parameters such as altitude, camera angles, speed, and solar position. This study examines the impact of various UAV flight parameters on the accurate detection of critical PV defects including hotspots, dirt from bird droppings, dust accumulation, and cell failures. For this purpose, two datasets were developed, comprising over 38,000 thermal infrared and RGB images. Using the YOLOv11 model, 21 flight configurations varying in altitude, camera tilt and pan angles, speed, and solar position were evaluated at four different times of day to assess the combined ambient and geometric effects on detection accuracy. Results indicate that low-altitude flights enhance small-object detection, while higher altitudes improve coverage at the expense of fine-detail accuracy. Dust detection is most effective when the camera aligns with the sun, whereas steep midday tilts cause reflective false positives. Thermal defect detection performs best during morning flights with moderate tilt angles. These findings emphasize the need to balance accuracy, coverage, efficiency, and safety, offering practical guidelines for effective and scalable PV inspection and maintenance.
Opportunities for Technological
Publishing year: 2025
Journal article
Critical Perspectives on Technological Innovations in Healthcare: Building …, 2025, 2025
Google Scholar
Pages 1
An extensive body of evidence demonstrates the significant impact of the COVID-19 pandemic on health systems on a global scale [1, 2] but also on the continued impact to this day that threatens the efficiency of systems [3, 4]. Such crises/emergencies have an impact on the primary goal of public healthcare which is to make healthcare resources more efficient and accessible. The unpredictability of diseases or pan-demics and other emergencies, may cause problems for health systems to deliver suitable and timely resource allocation.
Although the full grasp of the impact is difficult to be estimated, it is widely accepted that the pandemic has affected health systems in their totality. Aspects such as the pro-vision as well as the utilization of healthcare services because of such measures as lockdowns and stay-at-home orders were consider to have suffered a major impact. The healthcare workforce as the main driver of these health systems has also experienced a heavy impact as a result of the direct and indirect implications of the pandemic. Although the disruptions in the health service delivery have been recorded on a global scale, evidence indicate that the COVID-19 pandemic has made more significant disruption in health service delivery particularly in resource-limited countries potentially due to their reduced ability to absorb the increased demands placed by the disease [5]. The COVID-19 crisis had and is still having a huge impact on individuals, organizations, and societ...
Operation performance of a ground source heat pump system in the mediterranean climate zone. First results
Publishing year: 2025
Journal article
Energy Efficiency, 2025, Volume 18
Repository
This paper presents the configuration and performance of a Low Enthalpy Geothermal System successfully installed and utilized in the Mediterranean climate zone. Additionally, it examines the performance of different types of Ground Heat Exchangers (GHE), all installed in the same System. The Ground Source Heat Pump (GSHP) of the system consists of vertical ground heat exchangers (GHEs) in five different configurations, one double helicoidal coil in a well and an open loop (well) system. The entire system is constantly monitored by a Building Management System (BMS) that records the energy, volume flow, incoming and outgoing temperature at critical points of the system. Based on the recorded values, the performance of the System was analyzed in a heating and a cooling working mode, after examining the power flows in and out from critical points of the System. Results show higher heat exchange values inside the open well, both in heating and cooling mode suggesting the usage of this type of GHE, where applicable. Additionally, the electric power consumed by the chillers which are the largest electricity consumers within the System, is approximately five times lower than the power placed in the building by the Geothermal System (SCOP between 4.5 and 5). In terms of primary energy savings, we can say with confidence the GSHP systems working under Mediterranean climate zone conditions, can be consider as high efficiency solutions, verifying the theoretical efficiency given by the...
One Year of EarthCARE ATLID Level 2 Validation at CARO, a Coastal Ground-Based Observatory in Cyprus
Publishing year: 2025
Conference paper
EarthCARE Science and Validation Workshop 2025, 2025
Repository
A statistical analysis is presented based on comparison of the EarthCARE ATLID Level 2 products with measurements from the Cyprus Atmospheric Remote Sensing Observatory (CARO) over one year (01 October 2024 – 01 October 2025). As a multi-instrument station in a unique location, CARO provides observation from a wide variety of atmospheric conditions and participates in the EarthCARE Cal/Val activities through CORAL project (EVID39). During the study period, 65 overpasses were identified within a predefined 100 km distance from the station. The mean particle backscatter and extinction coefficients, lidar ratio, and depolarization ratio were retrieved for each layer from PollyXT and ATLID and subsequently compared using statistical metrics such as mean bias, correlation coefficient, and mean/median values. In addition, ATLID–PollyXT differences within the vertical profiles were analyzed through layer-by-layer distribution and profile statistics. To ensure consistency across cases, we performed our own along-track averaging of 50 km of ATLID recordings, while medium-resolution and low-resolution ATL_EBD_2A datasets also have been used. Along with, assessment of land–sea averaging effects linked to CARO’s coastal location has been performed. Finally, ATLID aerosol type classification (ATL_TC_2A) was also evaluated against the HETEAC-Flex retrievals utilizing ground based PollyXT data to assess consistency in aerosol typing for these cases.
On the tracks of an uninvited guest, the Asian tiger mosquito, Aedes albopictus in Cyprus
Publishing year: 2025
Journal article
Parasites and Vectors, 2025, Volume 18
Repository
Aedes albopictus, the Asian tiger mosquito, which is listed among the world's 100 most dangerous invasive species, is the main vector of chikungunya, dengue and Zika viruses. This mosquito species has rapidly dispersed and invaded much of the globe assisted by its life history traits and high propagule pressure driven by human activities. Aedes albopictus is currently widespread across mainland Europe and the Mediterranean region, including the islands. Cyprus remained free of Ae. albopictus until October 2022, when specimens were recorded for the first time in Limassol district, including the port area. Understanding the processes associated with the introduction, expansion and establishment of this vector in Cyprus is of primary importance to mitigate its dispersal on the island, and to implement control methods to prevent disease outbreaks. A genetic analysis of these invasive specimens collected in Limassol district and in areas from the Central Mediterranean was performed to obtain a genetic portrait of the demographic history of the invasive mosquitoes on Cyprus.
On the epistemic role of moral disgust in fiction: What can we learn from affective or empathetic engagement with vicious perspectives
Publishing year: 2025
Conference paper
Repository
One of the most interesting aspects of our engagement with fiction is that we often enjoy imaginatively engaging with morally flawed narratives or vicious perspectives. Yet, it sometimes happens that our ability to imaginatively engage with certain kinds of vicious perspectives is reduced or even suspended. In this paper, I will consider a particular aspect of resistance, namely, resistance to emotional or empathetic engagement with fiction (affective puzzle). To do so, I will examine a specific shortcoming within the current discourse. In addressing the relative difficulties in engaging with vicious perspectives, existing accounts of imaginative resistance acknowledge that readers may experience disgust or aversion, but they do not differentiate between distinct types of moral-related disgust or trace how each type influences our engagement with fiction. As the role of disgust in morality is debated and there are contrasting accounts of the nature of moral-related disgust, I argue that to fully explore the phenomenon, we must distinguish between two different types of moral-related disgust, each influencing our imagination in distinct ways. On the one hand, physical disgust that inscribes within the realm of morality by being causally linked to moral disapprobation, and, on the other hand, genuine moral disgust, that is a response to the morally reprehensible and is itself a moral emotion. I will describe the differences between these emotions and explain how they interact w...
Old Classics Anew. Industrial Era Classics, Made with Pre-Industrial Techniques
Publishing year: 2025
Graphic Design
International Artefacta Conference, 2025
Repository
This project sprung from the hypothesis that if the way we produce today is largely a consequence of the Industrial Revolution, then the re-introduction of pre-industrial techniques into modern systems of manufacture might bear some solutions to the problem of waste and overproduction. As the radical abandonment of these smaller scale techniques appears to have led to the destruction of the planet’s resources, we as craftsmakers aim to test how previous recipes can be reworked to fit in the contemporary household.
We are studying techniques used to produce well-preserved antique furniture made in mainland Europe. Cyprus, as a British colony, hosted several of them. These techniques may today seem gruesome or unethical since they involve the use of animal bones and rabbit skin, but could the actual products be disposed of as nutritious additions to household compost?
We are attempting to make a product in the way gilded furniture were made in 19th-century France, as we understand that local Cypriot makers used similar techniques to produce gilded mirror frames through local resources. The artefact chosen to embody this study is a replica of the classic Anglepoise 90, which is technically very specific and also an icon of industrialised design. This popular product bears decades of contextualization, raising fruitful conversations between the team members during the re-making process. At the moment the arising research questions contemplate whether the material called “C...
Old Classics Anew – Reflections on the study of Compo
Publishing year: 2025
Conference paper
4th International Artefacta Conference: Resolutions, 2025
Repository
This project sprung from the hypothesis that if the way we produce today is largely a consequence of the Industrial Revolution, then the re-introduction of pre-industrial techniques into modern systems of manufacture might bear some solutions to the problem of waste and overproduction. As the radical abandonment of these smaller scale techniques appears to have led to the destruction of the planet’s resources, we as craftsmakers aim to test how previous recipes can be reworked to fit in the contemporary household.
We are studying techniques used to produce well-preserved antique furniture made in mainland Europe. Cyprus, as a British colony, hosted several of them. These techniques may today seem gruesome or unethical since they involve the use of animal bones and rabbit skin, but could the actual products be disposed of as nutritious additions to household compost?
We are attempting to make a product in the way gilded furniture were made in 19th-century France, as we understand that local Cypriot makers used similar techniques to produce gilded mirror frames through local resources. The artefact chosen to embody this study is a replica of the classic Anglepoise 90, which is technically very specific and also an icon of industrialised design. This popular product bears decades of contextualization, raising fruitful conversations between the team members during the re-making process. At the moment the arising research questions contemplate whether the material called “Co...
